• Decent rate is 1.6 ft/s (0.5 m/s) minimum to 6.6 ft/s (2m/s) maximum. Descent rate will increase for heavier climbers.
• Maximum capacity is 310 lbs (140 kg). Minimum recommended capacity is 75 lbs (34 kg). Climbers less than 75 lbs will descend at a rate slower than 1.6 ft/s.
• Materials: Housing: Zinc plated carbon steel. Line: 0.8" wide nylon and Spectra™ webbing, minimum breaking strength 3,500 lbs (15.6 kN) (when new). Internal components are plated steel or aluminum.
• Certified to BSEN 364:1993
BRAKE HOUSING
A bronze housing that contains the brake mechanism. A hole in the bottom of the brake housing permits brake dust to
exit the unit. Always orient the Descender vertically with this hole facing down.
SECURITY RIVETS
Serve as evidence that the unit has been tampered with by other than an authorized factory representative.
NEVER open the housing or attempt a field repair. Serious injury could result.
NOZZLE
Helps seal the unit and prevent contaminants from entering the housing. Prevents line twisting.
LINE
3/4" nylon webbing.
SWIVEL CARABINER, OR SWIVEL SNAPHOOK
Self closing, self locking, provides an attachment means to the climber’s harness. |
